Hydraulic Valves

A hydraulic valve properly directs the flow of a liquid medium, usually oil, through your hydraulic systems. The direction of the oil flow is determined by the position of a spool. A hydraulic systems can only function - as per requirements - by using valves. Thus, you should always look for the correct type of hydraulic valve to serve your intended purpose

Hydraulic valves are sometimes referred to as hydraulic components. These are subdivided into three main categories: directional control valves, pressure control valves and flow control valves

The cylinders GREEN MLC represent, including all hydraulic actuators (cylinders) made by ML Hydraulic, Common pia choice in terms of working pressures and areas of use. The high standardization of components obtained through a careful design to cost and standardization of technological processes, without prejudice to the quality of processes and materials make the MLC GREEN cylinder a reliable and durable components in all situations of use. The cylinders MLC GREEN lining the obvious choice when the pia cheapness becomes it fundamental criterion in the choice of cylinder.

Hydraulic valves are available in a variety of sizes. The size required is determined by the maximum flow of the hydraulic systems through the valve and the maximum pressure in the hydraulic systems. Hydraulic valves are available with different mountings: e.g. mounting in pipe lines, threaded connection as cartridges, subplate mounting, etc.